【 Usage 】 The use of the product must comply with the relevant operating standards and regulations of the medical department, and is limited to trained doctors or nursing staff only< br>
Operation steps:< br> 1) Open the packaging and remove the pre filled catheter irrigator< br> 2) Push the core rod upwards (without unscrewing the protective cap) to release the resistance between the piston and the outer sleeve< br> 3) Under sterile conditions, rotate and unscrew the protective cap< br> 4) If connecting to an intravenous infusion system with a needle free infusion connector, please directly connect to the needle free infusion connector. If it is an infusion connector that requires steel needle connection, please install the injection needle on the flushing device under sterile conditions< br> 5) Keep the pre filled catheter flushing device upright and remove any gas from the flushing device< br> 6) Connect the pre filled catheter flushing device to the connector, valve or needle free system, and flush it according to national laws and regulations and manufacturer's recommendations< br> 7) Discard used pre filled catheter flushers and any remaining unused solution. Do not reuse.