Application scope: Used for connecting with the external part of the peritoneal dialysis tube during peritoneal dialysis in hospitals and households
Product details
Instructions for use:
Wear a mask and thoroughly clean your hands
Before use, first check if the packaging of the product is intact
The operator stands on a smooth surface and grabs the outer connecting tube, tears open the packaging at the tear opening position, and exposes the outer connecting tube. Remove the outer tube from the packaging, connect one end to the inner tube with a titanium alloy interface, and connect the other end to the dialysate tube. When replacing, grasp the outer connecting pipe and rotate it counterclockwise to remove it. After the pipeline connection is completed, place the rotating water stop sleeve in the liquid inlet position according to the indicated direction, and after confirming again that it is correct, open the liquid stop clamp< br>
After the infusion is completed, place the water stopper in the drainage position and drain the liquid from the abdominal cavity. Repeat this process to complete the dialysis treatment< br>
After completing dialysis treatment, use a new iodine cap to connect to the cathode locking joint, and replace the disposable iodine cap after each use< br>
注意事项：
• 接管属于一次性使用
• 使用本产品应无菌操作
Contact Us
Address：No. 88, Science and Technology Park, Zhangguo Town, Xinghua City, Jiangsu Province
